Agilent Technologies E2050, Installation And Configuration Manual, Page: 101 / 111

Specifications 101
Specifications
Power Requirements
Environmental
GPIB Characteristics
The GPIB connection conforms to IEEE 488.1 - 1987 specifications. Per this
specification, the following constraints exist:
E2050 AC/DC Adapter
Input Voltage 5Vdc 100-240Vac
Input Current ~0.8A Typical 9.75A
Frequency Range dc 50/60Hz
Output Current N/A 2.0A Maximum
Power Consumption 4W (Typical)
10W (Maximum)
Operating Non-Operating (Storage)
Temperature
0°C to +40°C
–40°C to +70°C
Relative Humidity 15% to 80% at 40°C 90% R.H. at 60°C 24 hrs.
Total Bus length: Less than 2 meters x number of devices and no
more than 20 meters total length.
Length between devices: Less than 2 meters between each device or
equivalent standard load.
Total number of devices: 15 devices or less (includes Gateway).
Address restrictions: Address 31 is a reserved IEEE 488 address.
Address 21 is normally used by the E2050
LAN/GPIB Gateway, unless changed in the
configuration table.
Drivers: 48mA three-state drivers (E2).