ADM Flow Meter
Introduction
Agilent CrossLab CS ADM Flow Meter Operation Manual
5
Introduction
The Agilent ADM flow meter is controlled with two buttons on
the front of the instrument directly below the screen, as shown
in
. The functions of these buttons are described in
this section.
Power/Mode button
The Power/Mode button is used to switch the flow meter on
and off, as well as to scroll through and select different
operational modes.
•
To turn on the instrument, briefly press and release the
Power/Mode button.
•
To turn off the instrument, press and hold the Power/Mode
button for three seconds.
•
To scroll through the available modes, when the
instrument is on, briefly press and release the
Power/Mode button.
Figure 1. The Agilent CrossLab CS ADM flow meter front
screen buttons.
