ADM Flow Meter
Split mode
14
Agilent CrossLab CS ADM Flow Meter Operation Manual
Split mode
In this mode, you can store a flow measurement as a reference
value, and then compare subsequent flow measurement values
as a ratio of the current measurement to the reference
measurement. This is useful when trouble shooting a GC Inlet.
Info mode
Info
mode provides details on the flow meter and the installed
cartridge. In addition,
Info
mode allows you to set the display
brightness and control the Auto off functionality.
To access Info mode:
1
With the unit switched on, repeatedly press the
Power/Mode button until
Info
mode is displayed.
2
Once in
Info
mode, pressing the Enter/Clear/Toggle button
scrolls through the available screens.
Display brightness
Display brightness can be set to high or low.
To change the display brightness setting:
1
With
Info
mode displayed, briefly press and release the
Enter/Clear/Toggle button to cycle through available
screens until the
Brightness
screen is displayed.
2
Press and hold the Enter/Clear/Toggle button for
two seconds to toggle between
High
and
Low
options. The
screen brightness changes based on the selected option.
