Agilent Technologies Cary 50, Hardware Manual

Page: 15 / 38

Installation
Cary 50 Spectrophotometer Hardware Manual 15
3. Installation
Cell holder 16
Uninstalling the Cary WinUV software 19
Uninstalling the Cary 50 driver 19
The Agilent Cary 50 spectrophotometer is designed to be completely
customer-installed. Instructions for setting up the system are
included in the installation guides supplied with the instrument. You
should select the one appropriate for the operating system you are
using on your computer.
WARNING Heavy Weight Hazard
The Cary 50 weighs over 20 kg (44 lb). To avoid injury to personnel or damage
to equipment, always use two or more people when lifting or carrying the
instrument. NEVER attempt to lift the instrument alone.
Details for unpacking the instrument and what to do in case it has
been damaged in transit are outlined in the pReinstallation manual.
Following the instructions in the Cary 50 Installation Instructions
(Publication Number 8510185100) you should have:
 Unpacked the spectrophotometer and placed it on the intended
workbench.

Connected the computer to the power supply.
 Installed the Cary WinUV software.

Installed the instrument interface card in the computer (if you
supplied your own computer).