Technical Information
Stopping the Pump
5
MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01 (
H.00
)
72/104
Stopping the Pump
There are no special procedures for switching the pump off.
To switch the pump off, act on the mains switch. It's recommended
not to disconnect the power cord from the mains supply. When the
pump is stopped, the anti-suckback device makes it possible to
maintain vacuum in the vessel connected on the inlet flange of the
pump.
Safety Rules
Personnel responsible for pump operation and maintenance must be
well-trained and must be aware of the accident prevention rules. The
accident prevention precautions contained in this section must be
respected at all times during operation and maintenance of the pump
to avoid damage to operators and to the pump. These precautions are
provided in the form of WARNING and CAUTION notes.
WARNING!
Operating procedures, technical information and precautions which, if not
respected and/or implemented correctly may cause body harm to operators.
NOTE
Use the Retention Spring to secure the mains cable into the IEC320 socket.
CAUTION!
Operating procedures, technical information and precautions, which, if not
respected and/or implemented correctly, may cause damage to the pump.
