manualshive.com logo in svg

Agilent Technologies 83486A, User Manual, Page: 11 / 90

Share
Download
Agilent Technologies 83486A User Manual Download Page 11

1-2

Getting Started

Getting Started

Getting Started

This chapter gives a description of the plug-in module, lists options and acces-
sories, explains menu and key conventions used, shows how to install your 
Agilent 83486A optical/electrical plug-in module, and gives information for 
returning the plug-in module for service.

Refer to Chapter 2, “Channel Setup Menu” for information on operating the 
plug-in module.

Refer to Chapter 3, “Calibration Overview” for calibration information.

Refer to Chapter 4, “Specifications and Regulatory Information” for informa-
tion on operating conditions, such as temperature.

C A U T I O N

This product is designed for use in INSTALLATION CATEGORY II and 
POLLUTION DEGREE 2, per IEC 1010 and 664 respectively.

C A U T I O N

The input circuits can be damaged by electrostatic discharge (ESD). 
Therefore, avoid applying static discharges to the front-panel input connectors. 
Before connecting any coaxial cable to the connectors, momentarily short the 
center and outer conductors of the cable together. Avoid touching the front-
panel input connectors without first touching the frame of the instrument. Be 
sure that the instrument is properly earth-grounded to prevent buildup of 
static charge. Refer to “Electrostatic Discharge Information” on page 5-7.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for 83486A



























































































Reviews:

No comments