Getting Started
3.10.2
Settings for Channel 2
Selecting a Pulse
waveform
To set the operating mode and trigger mode as required, do the following:
Press the
Ch 2
key to select Channel 2.
The
Continuous
trigger mode and
Pulse
waveform were copied from
Channel 1 when we enabled Coupling. Therefore, we do not change
these settings.
Selecting the
Frequency
By default, the
Frequency
is already set to 1 MHz, therefore we do
not change it.
Setting Delay
Press the
Delay
softkey and set the value to 200 ns.
For setting the value, you can use the Numeric Keypad or the Rotary
Knob.
Summary of Contents for 81150A
Page 1: ...Agilent Pulse Function Arbitrary Noise Generator 81150A and 81160A Getting Started Guide...
Page 6: ...Introduction 4 5 Operating Environment 99 4 6 Cleaning Recommendation 100...
Page 101: ...Installation and Maintenance 81150A and 81160A Getting Started Guide 101...
Page 102: ...Copyright Agilent Technologies 2011 First Edition March 2011 Printed in Germany...
