Getting Started
81150A and 81160A Getting Started Guide
43
Selecting a Pulse
Waveform
To set the operating mode and trigger mode as required, do the following:
Before setting any values, press the
Store/Recall
key and press the
Set to Defaults
softkey.
Press the
Ch 1
key to select channel 1.
Press the normal and inverted output keys to enable both outputs of
channel 1.
Press
Pulse
to select it as the waveform type.
Setting the Period
Pressing the
Frequency
softkey selects frequency. Press it again to
toggle to
Period
softkey. Set the value of the Period to 500ns.
For setting the value, you can use the Numeric Keypad or the Rotary
Knob.
From the various available options, choose the desired unit by simply
pressing it.
Summary of Contents for 81150A
Page 1: ...Agilent Pulse Function Arbitrary Noise Generator 81150A and 81160A Getting Started Guide...
Page 6: ...Introduction 4 5 Operating Environment 99 4 6 Cleaning Recommendation 100...
Page 101: ...Installation and Maintenance 81150A and 81160A Getting Started Guide 101...
Page 102: ...Copyright Agilent Technologies 2011 First Edition March 2011 Printed in Germany...
