Installation Guide: Flame Ionization Detector (FID)
5
2
If necessary, lift out the die-cut insulation plug from the
detector position to be used.
3
Carefully remove the scribed circle of insulation from the
oven top to create an opening into the oven.
Method 1
: Use a sharp knife to cut out insulation using the
scribed circle as a guide.
Method 2
: Pierce the insulation with a screwdriver. Rotate
the screwdriver around the edge of the scribed circle to
remove excess insulation. Remove any pieces of insulation
which fall inside the oven.
C A U T I O N
Be careful to remove only insulation within the scribed circle.