Agilent Technologies 54835A, Service Manual, Page: 24 / 208

Chapter 1: General Information
Recommended test equipment
1–16
Recommended test equipment
The following table is a list of the test equipment required to test performance, calibrate and
adjust, and troubleshoot this instrument. The table indicates the critical specification of the test
equipment and for which procedure the equipment is necessary. Equipment other than the
recommended model may be used if it satisfies the critical specification listed in the table.
Recommended Test Equipment
Equipment Required Critical Specifications Recommended Model Use *
Signal Generator 1 - 2.25 GHz, sine wave, amplitude 30 - 200
mV
rms
, time base accuracy 0.25 ppm
Agilent 8664A P
RF Amplifier 22 dB gain at 10 MHz, 1.3 GHz bandwidth Agilent 8447D/F P
Power Meter/Power
Sensor 1 - 500 MHz, -70 dBm to +44 dBm,
±
3% accuracy Agilent EPM-
441A/Agilent 8482A P
DMM 6 1/2 digit (0.1 mV) resolution, dcV accuracy
8 ppm/year, 4-wire resistance acc.
±
0.25%
Agilent 34401A P, A, T
Power Supply 7 mV - 30 V dc, 0.1 mV accuracy and resolution Agilent 6114A P
Power Splitter 50
Ω
type N, outputs differ by <0.15 dB Agilent 11667A P
Probe No substitute Agilent 1161A P
Probe Tip Adapter 1160 series to BNC Agilent 5063-2143 P
Oscilloscope General-purpose Agilent 54622A P, T
Blocking Capacitor 0.18
µ
F Agilent 10240B P
Cable Type N (m)(m) - 3 foot Agilent 11500A or B P
Cable (2) BNC - 3 foot Agilent 10503A P, A, T
Cable (3) BNC - 9 inch Agilent 10502A P, A, T
Adapter N (m) to BNC (m) Agilent 1250-0082 P
Adapter N (m) to BNC (f) Agilent 1250-0780 P
Adapter N (f) to BNC (m) Agilent 1250-0077 A
Adapter (2) BNC tee (m)(f)(f) Agilent 1250-0781 P, T
Adapter BNC (f)(f) Agilent 1250-0080 T
Adapter (2) BNC (f) to dual banana (m) Agilent 1251-2277 P
Termination BNC connectors 50
Ω
Agilent 10100C P
Shorting cap BNC Agilent 1250-0774 P
Resistor (2)
5 Ω,
5 W Agilent 0812-0047 T
Video monitor Accepts VGA-standard video signals T
Keyboard PC-compatible, AT 5-pin connector Agilent E2610A T
Mouse PS/2 compatible Agilent C3751-60201 P, T
POST Card Power-on self test card compatible with PC-
compatible systems T
Fan Safety Shield Clips onto side of chassis with cover removed Agilent 54801-00601 A, T
Service software No substitution Agilent 54810-68700 T
Note: the Fan Safety Shield and Service software are part of the Service Kit, Agilent P/N 54810-68703.
* P = Performance Tests, A = Adjustments, T = Troubleshooting