background image

4

 

 

Warranty

This Agilent Technologies instrument product is warranted against defects in 
material and workmanship for a period corresponding to the individual warranty 
periods of its component products. Instruments are warranted for a period of one 
year. Fixtures and adapters are warranted for a period of 90 days. During the 
warranty period, Agilent Technologies will, at its option, either repair or replace 
products that prove to be defective.

For warranty service or repair, this product must be returned to a service facility 
designated by Agilent Technologies. Buyer shall prepay shipping charges to 
Agilent Technologies and Agilent Technologies shall pay shipping charges to 
return the product to Buyer. However, Buyer shall pay all shipping charges, duties, 
and taxes for products returned to Agilent Technologies from another country.

Agilent Technologies warrants that its software and firmware designated by 
Agilent Technologies for use with an instrument will execute its programming 
instruction when property installed on that instrument. Agilent Technologies does 
not warrant that the operation of the instrument, or software, or firmware will be 
uninterrupted or error free.

Limitation Of Warranty

The foregoing warranty shall not apply to defects resulting from improper or 
inadequate maintenance by Buyer, Buyer-supplied software or interfacing, 
unauthorized modification or misuse, operation outside the environmental 
specifications for the product, or improper site preparation or maintenance.

IMPORTANT

No other warranty is expressed or implied. Agilent Technologies specifically 
disclaims the implied warranties of merchantability and fitness for a particular 
purpose.

Exclusive Remedies

The remedies provided herein are buyer’s sole and exclusive remedies. Agilent 
Technologies shall not be liable for any direct, indirect, special, incidental, or 
consequential damages, whether based on contract, tort, or any other legal theory. 

Summary of Contents for 42942A







































Reviews: