24
Chapter 3
Operation
Connecting Test Fixture
Connecting Test Fixture
After the adapter setup, you can connect the test fixture to the terminal adapter.
Refer to the manual that came with the fixture for the connection procedure. The
connection procedure shown below is common to most fixtures.
1. Turn the 7-mm OUTPUT port connector on the terminal adapter
counterclockwise until the connector sleeve is fully retracted.
2. Join the test fixture to the terminal adapter by keying the mounting posts and
the OUTPUT port of the adapter.
3. Turn the 7-mm OUTPUT port connector on the terminal adapter
counterclockwise to secure it to the connector on the lower side of the test
fixture.
Figure 3-5
Connecting Test Fixture
Summary of Contents for 42942A
