Agilent Technologies 34941A User Manual Download Page 6

Page: 6 / 15

Additional Safety Notices

The following general safety precautions
must be observed during all phases of oper-
ation of this instrument. Failure to comply
with these precautions or with specific
warnings or instructions elsewhere in this
manual violates safety standards of design,
manufacture, and intended use of the
instrument. Agilent Technologies assumes
no liability of the customer’s failure to com-
ply with the requirements.

General

Do not use this products in any manner not
specified by the manufacturer. The protec-
tive features of this product may be
impaired if it is used in a manner not speci-
fied in the operation instructions.

Before Applying Power

Verify that all safety precautions are taken.
Make all connections to the unit before
applying power.

Ground the Instrument

This product is provided with protective
earth terminals. To minimize shock hazard,
the instrument must be connected to the
ac power mains through a grounded power
cable, with the ground wire firmly con-
nected to an electrical ground (safety
ground) at the power outlet. Any interrup-
tion of the protective (grounding) conduc-
tor or disconnection of the protective earth
terminal will cause a potential shock haz-
ard that could result in personal injury.

Do Not Operate in an Explosive
Atmosphere

Do not operate the instrument in the pres-
ence of flammable gases or fumes.

Do Not Remove the Instrument
Cover

Only qualified, service-trained personal
who are aware of the hazards involved
should remove instrument covers. Always
disconnect the power cable and any exter-
nal circuits before removing the instrument
cover.

Do Not Modify the Instrument

Do not install substitute parts or perform
any unauthorized modification to the prod-
uct. Return the product to an Agilent Sales
and Service Office for service and repair to
ensure that safety features are maintained.

In Case of Damage

Instruments that appear damaged or defec-
tive should be made inoperative and
secured against unintended operation until
they can be repaired by qualified service
personnel.

Safety Symbols

Waste Electrical and Electronic
Equipment (WEEE) Directive
2002/96/EC

This product complies with the WEEE
Directive (2002/96/EC) marking require-
ment. The affixed product label (see above)
indicates that you

must not discard this

electrical/electronic product in domestic
household waste

Product Category: With reference to the
equipment types in the WEEE directive
Annex 1, this product is classified as a
“Monitoring and Control instrumentation”
product.

To return unwanted products, contact



your local Agilent office, or go to



www.agilent.com/environment/product

for more information.

Technical Support

If you have questions about your shipment,
or if you need information about warranty,
service, or technical support, contact



Agilent Technologies:

In the United States: (800) 829-4444

