Agilent Technologies 34941A User Manual Download Page 11

2

Agilent 34941A-34942A RF Multiplexer Modules User’s Guide

Operating Considerations.

Operating Considerations.

Electrical Considerations

See the 

Introduction to the Plug In Modules

 chapter of the 34980A 

Mainframe User’s Guide

 

for detailed environmental operating conditions 

for the 34980A mainframe and its installed modules. That guidance sets 
maximum per channel current and power ratings at rated voltage for 
pollution degree 1 (dry) and pollution degree 2 (possible condensation) 
conditions, for each of the GP modules.

Signal Connections

The RF MUX modules do not connect to the analog buses. Instead, all 
signal connections are made through the visible connectors via external 
cables. Each visible connector on an RF MUX module is labeled with a 
number (11 through 44), that represents a channel you can close 
programmatically from the front panel or with using the Web Browser 
Interface. When you close a channel on the RF MUX modules you 
automatically close all relays that create a direct path to the Common of a 
bank.

Channel Relay Operation

With RF MUX switches, you cannot open switches programmatically. You 
can only close a channel. When you close one channel, another channel 
automatically opens. Therefore, only one channel relay in each bank is 
closed at any time. 

Electrical Isolation

You can configure each bank on the RF MUX modules to be either isolated 
or chassis- grounded. The modules come with chassis- grounded metal 
shoulder washers installed on all connectors in each bank of relays. If you 
want to isolate a bank from the other banks and from chassis- ground, you 
must remove the five metal washers in that bank and replace them with 
the provided plastic shoulder washers. 

To isolate a bank from other banks 
and chassis-ground, install the 
provided 

plastic

 shoulder washers 

on the connectors in the bank to 
be isolated. When installing the 
plastic shoulder washers, use 

7 in-lbs of torque. 

The 34941A and 34942A are shipped 
from the factory chassis-grounded 

with 

metal

 shoulder washers 

installed on all connectors in each 
bank of relays. 

Summary of Contents for 34941A
















Reviews: