Product Markings
7
To Clean the Probe
1
Remove the probe from any circuit under test and from the
oscilloscope.
2
Clean the external surfaces of the probe with a soft cloth
dampened with a mixture of mild detergent and water.
3
Clean the mating surfaces of the probe’s jaws so that they are free
of dirt or foreign matter. If rust is present, gently clean the mating
surfaces with a soft cloth that has been lightly oiled with standard
machine oil. Do not leave excessive oil residue.
WARNING
Make sure that the probe is completely dry before reconnecting it to a power
source.
Product Markings
This symbol indicates the Environmental Protection Use
Period (EPUP) for the product’s toxic substances for the
China RoHS requirements.
The CE symbol indicates the European Community.
CAUTION. Risk of Danger. Refer to the manual for more
information.
CAUTION. Risk of Electric Shock. Refer to the manual for
more information.
This symbol signifies that the probe is protected by double
or reinforced insulation. Only use specified replacement
parts when servicing the probe.
WEEE Directive notice. This marking is on a notice sticker
and is not actually fixed to the product.