mDT001 HazMon System Tester Technical Manual /15
CMC INDUSTRIAL ELECTRONICS LTD
Phone: (604) 421-4425 Toll Free: (888) 421-4425 Fax: (604) 421-7734
www.cmciel.com [email protected]
The Industry Leader in HazMon Technology
3.4 Sensor Emulator
The tester can emulate most CMC sensors. Sensors that can have multiplexed output modes
such as the mTS017 and mVM001 will only be emulated as single mode devices. The mTC001
and mTC002 Thermocouple converters cannot be emulated. To emulate a sensor follow these
steps:
1.
Select “
Emulate Sensor
” from the main menu;
2. The display will indicate:
3. Once connected, the display will indicate the serial number of the sensor being
emulated;
4. After displaying the serial number the display will indicate;
5. Connect the tester to the bus using the supplied cable;
6. The display will now indicate the type of sensor being emulated and the value being sent
to the host system;
7. The
Up
and
Down
keys can be used to change the value. The range of values that can
be emulated are dependent on the sensor. Negative values are permitted for some
sensors. If the sensor cannot be emulated the display will show;
Connect sensor
to emulate
166- 0-188- 58
230- 0- 17- 52
Connect tester
To bus
mTS011
0.0 C 32.0 F
Sensor cannot
be emulated
