20 |
P a g e
Figure 3.4.4. Controller Setup Screen
You can select the controller model that is compatible with the DVR.
The following options are available on the CONTROLLER setup.
CONTROLLER
(Controller model that is compatible)
SPEED (Baud Rate)
(19200, 14400, 9600, 4800, 2400)
ID
(0-63)
3-4-2-2. PTZ Setup
To control the PTZ functions of the camera, connect a rs-485 cable of the PTZ camera to the RS-485 port on the DVR
system.
①
Connect the RS-485 cables of the PTZ camera to the RS-485 port on the rear panel.
②
Go to DEVICE>CONTROLLER & PTZ menu.
③
Select the channel that the PTZ camera is connected from CHANNEL menu.
④
Set the camera protocol, speed and ID as same value as the connected PTZ camera has.
You can select or set the protocol type of the camera that is the same as the one installed on the site. If the camera
has a specific camera ID, select the camera ID using the mouse or the control button of the remote control.
The following options are available on the PTZ setup.
CHANNEL
(Channel number that the PTZ is connected to)
CAMERA
(Protocol type)
SPEED (Baud Rate)
(19200, 14400, 9600, 4800, 2400)
ID
(0-63)
Note
: For speed dome cameras that support RS-485, connect them directly to the RS-485 port. If the camera is
controlled with RS-232C, use a RS-485 to RS-232C signal converter.
