18 |
P a g e
3-4. Setup – Device Mode
In the SETUP menu, select the DEVICE tab
. Then, the device menu is displayed as pictured below. Navigate
through the menu items using the mouse or the control button on the remote control and change the value of the
menu item.
Figure 3.4.1. Device Mode Setup Screen
Table 3.4.1. Menu Items in Device Setup Screen
Item
Description
ALARM OUT
Set/allocate the alarm triggers, Sensor, Motion, Video loss, and Alarm
duration for each alarm-out.
CONTROLLER & PTZ
CONTROLLER (DVR)
: Set the speed and ID to navigate and control the DVR
system setup menu with the selected controller.
CHANNEL (PTZ)
: Set the PTZ camera, speed, and ID to control the PTZ camera.
CHANNEL
Select specified channel for motion zone setup.
MOTION ZONE
Select either Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY
Set the motion sensitivity for the specified channel.
Control the motion sensitivity from 1 to 9.
KEY TONE
Enable/disable key tone.
REMOTE CONTROLLER
ID
Select an ID of remote controller.
SENSOR
Select the sensor number to set the type of sensor.
TYPE
Set the type of sensor for the specified channel.
Options are: OFF, NORMAL OPEN, or NORMAL CLOSE.
