AGFA SelectSet Avantra 20, Operating Manual, Page: 56 / 174

2–20 SelectSet Avantra Series Control Panel and Operating Guide
Monitoring Jobs with the Progress Bar
n
The progress bar appears at the bottom of the Run screen.
n
While the imagesetter is busy, the outline of the progress bar
appears in bold. The bar fills in to indicate the progress of the job.
Viewing Current Job Information
n
The name of the job being imaged appears over the progress bar.
The imagesetter clears this information when the job is finished.
n
A limited number of spaces are available to display the name. The
display cuts job names that are too long starting from the left.
n
The page, copy, and separation number appear above the job
name.
Figure 2.10
➀
—Page number. Corresponds to page number that appears
when you display job history.
➁
—Copy (if you are imaging multiple copies of a job.)
➂
—Separation number.
➃
—Job name.
❖
Note: The job name may or may not appear on the Avantra
control panel screen due to differences in LaserWriter drivers used
to send the job. Typically, jobs sent or saved with 7.x LaserWriter
drivers post the job name. Jobs sent or saved with 8.x drivers post
only the sending Macintosh’s name.
A
B
F
#1
PL
#2
xxxxxxxxxxxxName/Nombre/Nom/
➀ ➁ ➂
➃
1, 1, 1
1
xxxxxxxxxxxxName/Nombre/Nom/
1, 1, 1