AGFA SelectSet Avantra 20, Operating Manual, Page: 132 / 174

4–22 SelectSet Avantra Series Control Panel and Operating Guide
70 Jam in Buffer Before Exiting to
Processor
The imagesetter is ready with media, but the buffer
already has media at the processor entrance.
Uncover the buffer and clear media. Remove top panels
of the bridge and clear media. Clear the error and
repeat the task in process.
If the error persists, call for service.
71 Jam Moving Buffer Carriage
The sensor is not detecting the buffer carriage move-
ment.
Open the buffer top panel and covers and check for a
possible carriage jam. Remove any jammed media.
Check the carriage sensor flags for possible damage or
mis-alignment.
Note that the buffer carriage may be moved manually
without harming the assembly.
Reset. If the error persists, call for service.
72 Jam in Bridge Shuttle
The shuttle that adjusts the bridge weight is jammed.
Reset. If the error persists, call for service.
73 Bridge Out of Position
An attempt was made to put the bridge in light mode
while it is in the up position.
The bridge is already in light mode if it is in the up
position. Clear the error code and continue.