AGFA DX-D User Manual Download Page 6

Page: 6 / 52

Warnings, Cautions, Instructions and Notes

The following samples show how warnings, cautions, instructions and notes

appear in this document. The text explains their intended use.

Warning

: Warnings are directions which, if they are not

followed, can cause fatal or serious injuries to a user,

engineer, patient or any other person or can lead to a

mistreatment.

Caution

Cautions are directions which, if they are not followed,

can cause damage to the equipment described in this manual or

any other equipment or goods and can cause environmental

pollution.

Instruction

This sign is typically used in combination with the

warning sign when providing a specific instruction. If it is followed

exactly, it should avoid the subject of the warning.

Note

Notes provide advice and highlight unusual points. A note is

not intended as an instruction.

| DX-D Software Console | Introduction to this Manual

0189D EN 20180329 1421

Summary of Contents for DX-D





















































Search results

Summary of Contents for DX-D

Reviews:

Related manuals for DX-D

Brands by name

Popular brands

AGFA DX-D, User Manual

Search results

Summary of Contents for DX-D

Reviews:

Related manuals for DX-D

Brands by name

Popular brands