Collimator Parameters
On systems with an automatic collimator, the collimation is automatically set,
based on the selected exposure.
To modify the automatic collimation, increase or decrease the collimator
parameters step by step, using the UP and DOWN arrows. The values increase
or decrease step by step each time the corresponding button is touched.
Figure 22: Collimator parameters
To use the same collimation setting on different exposures, push the store
button on the first exposure and push the restore button on all later exposures
that require the same collimation setting.
DX-D Software Console | X-Ray Modality Controls Window |
47
0189D EN 20180329 1421
