How to clean the tray and image plate?
To clean the tray and image plate:
1.
Insert a key or a pen into the cassette lock to open the shutter.
2.
Remove the key or the pen.
3.
Turn the cassette around, so that the black tube side is above.
4.
Hold back the shutter with both thumbs and let the black tray and image
plate slide out carefully onto the table.
5.
Put the black tray with the image plate onto the cassette, as shown in the
figure below.
The tray has 2 little hooks. Put the tray onto the cassette in such a way that
the hooks reach over the border of the cassette. This to avoid a bending of
the tray and image plate.
6.
Clean the image plate and the tray as follows:
6
| Cleaning the image plate and tray of CR MD4.0T and CR MM3.0T | Cleaning the Tray and
Image Plate
0043A EN 20130329 1509