When to clean the tray and image plate?
The inner lining of the cassette is made of fleece. This ensures a high degree of
protection against electrostatic charging and dust collection on the image
plates. Nonetheless it is recommended to clean the image plates of the
CR MD4.xT at least once every month or whenever there is doubt about
particles visible on the X-ray images. More frequent cleaning is required in
case of excessive dust or under very dry conditions.
The CR MM3.xT image plate requires a more frequent cleaning: at least once a
week or after every 200 cycles (whatever comes first).
4
| Cleaning the image plate and tray of CR MD4.0T and CR MM3.0T | Cleaning the Tray and
Image Plate
0043A EN 20130329 1509