AGFA 8207/050 User Manual Download Page 64

Page: 64 / 83

Step 5: Execute the exposure

In the operator room:

Press the exposure button to execute the exposure.

WARNING:

The radiation indicator on the control console lights up

during exposure release.

In the operator room at the NX workstation:

• The actual X-Ray exposure parameters are sent back from the console to

the NX workstation and are shown in the Image Detail pane.

• The actual X-Ray exposure parameters and the Exposure Index (EI) value

on the NX workstation can be used to monitor the performance of the
Automatic Exposure Control of the X-Ray system.

• A green OK mark appears on all thumbnails for which the exposures are

made and for which exposure settings are sent back to the NX workstation.

| DX-D 300 | Operation

0172E EN 20181116 1653

Summary of Contents for 8207/050




















































































Search results

Summary of Contents for 8207/050

Reviews:

Related manuals for 8207/050

Brands by name

Popular brands

AGFA 8207/050, User Manual

Search results

Summary of Contents for 8207/050

Reviews:

Related manuals for 8207/050

Brands by name

Popular brands