AGFA 8207/050 User Manual Download Page 56

Page: 56 / 83

Step 5: execute the exposure

In the operator room:

Press the exposure button to execute the exposure.

Make sure the generator is ready for exposure before you

press the exposure button.

WARNING:

The radiation indicator on the control console lights up

during exposure release.

WARNING:

Do not select another thumbnail until the preview image is

visible in the active thumbnail.

In the operator room at the NX workstation:

• The image is acquired from the DR detector and displayed in the

thumbnail.

• The actual X-Ray exposure parameters are sent back from the generator to

the NX workstation and are shown in the Image Detail pane.

• If collimation is applied, the image is automatically cropped at the

collimation borders.

| DX-D 300 | Operation

0172E EN 20181116 1653

Summary of Contents for 8207/050




















































































Search results

Summary of Contents for 8207/050

Reviews:

Related manuals for 8207/050

Brands by name

Popular brands

AGFA 8207/050, User Manual

Search results

Summary of Contents for 8207/050

Reviews:

Related manuals for 8207/050

Brands by name

Popular brands