manualshive.com logo in svg

AGFA 5410/050, User Manual

Share
Download
AGFA 5410/050 User Manual Download Page 73

Motorized movement has stopped and unit cannot be
moved

De-

tails

The motorized movement has stopped because the unit is switched

off or a problem has occurred. The unit cannot be moved.

Cause The wheels are blocked.

Solu-

tion

To move the unit manually:

1.

If the wheels have a hubcap, dismount the hubcap from the

wheel rim by removing the two fixing screws. Take care not to

lose these screws and the spacers located behind the hubcap.

1

1.

Hubcap fixing screws

2.

Remove the two clutch screws (Allen type) located on each

wheel using the Allen wrench provided with the unit.
This will uncouple the wheels from the motors (releasing the

brakes) allowing the free motion of the unit.

1

1.

Clutch screws

3.

To reassemble the hubcap, place the two spacers in the original

position, mount the hubcap and secure it with the two fixing

screws.

Related Links

Storage of Allen wrench

 on page 33

Storage bin

 on page 24

DX-D 100 | Problem solving | 

73

0187K EN 20191024 1609

Summary of Contents for 5410/050












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands