manualshive.com logo in svg

AGFA 5410/050, User Manual

Share
Download
AGFA 5410/050 User Manual Download Page 49

Starting DX-D 100

To start DX-D 100:

1.

Unplug the unit from the mains power.

2.

Unlock the device.

• To unlock the device using the key, switch the key on the control panel

to the “ON” position.

1

1.

“ON” position

• To unlock the device using the on/off keypad, press and hold the

power button until the green status indicator light starts blinking, dial

the four digit access code and press the enter button.

1

2

1.

Power button

2.

Enter button

The X-ray generator is powered on.
The Windows log in window appears.

3.

Log in to Windows.

• To log in using your password, enter your user name and password and

click 

OK

.

• To log in using the optional RFID reader, select the Aloaha login

method, touch the RFID reader with your personal RFID key and click

OK

.

The NX application and the software console become available on the

control console.
For detailed information about starting up NX, refer to the NX User

Manual, document 4420.

4.

On the control panel, check the battery levels.
If the red indicator is blinking, operation is not allowed. In that case, it is

necessary to charge the batteries.

DX-D 100 | Getting started | 

49

0187K EN 20191024 1609

Summary of Contents for 5410/050












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands