manualshive.com logo in svg

AGFA 5410/050, User Manual

Share
Download
AGFA 5410/050 User Manual Download Page 66

8.

Enter PIN code 0102.
If an individual PIN code is entered, the user will be required to enter that

PIN code each time when logging in to the system.

9.

Touch the RFID reader with the new RFID key.

10.

Click 

Save

.

A confirmation dialog is displayed.

11.

Click 

OK

.

Updating the password of a user

If the password of a user has been changed on Windows, the user password
must also be updated in the Keycard Credentials tool.

If multiple RFID keys are linked to this Windows user account, the procedure
must be repeated for each RFID key.

To do this, you need the user's keycard and the new password.

1.

Go to the Windows 

Start menu

 > 

Aloaha

 > 

Keycard Credentials

 and

click 

Keycard Credentials

.

The 

Keycard Credentials

 dialog is displayed.

Figure 19: Keycard Credentials

2.

Touch the RFID reader with the user's RFID key.

3.

Enter PIN code 0102.

4.

Push the button 

Refresh list above

.

In the 

Accounts for card

 field, the connected user will appear.

5.

Click the user account.

The user name is copied to the 

Username

 field.

66

 | DX-D 100 | Getting started

0187K EN 20191024 1609

Summary of Contents for 5410/050












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands