AGFA 5367/500 User Manual Download

Page: 121 / 168

Safety guidelines

WARNING:

To prevent damage to the printer while performing

maintenance, observe the following safety precautions:

• Do not lubricate the printer.
• Do not attempt to disassemble the printer.
• Do not touch the resistor line of the print head.
• Always switch off the printer and disconnect the power cord

from the outlet before carrying out any maintenance work

inside the printer.

Note

Film jam removal or cleaning the printer head can be done

without switching the power off.

Related Links

Safety precautions

on page 25

Recurrent safety tests

The printer shall be tested according to IEC 62353* in a time interval of at

least 36 months or less if local regulations are different.
*Medical electrical equipment – Recurrent test and test after repair of medical

electrical equipment.

Dry 2.4M | Preventive maintenance schedule |

121

2652B EN 20210601 1655

Summary of Contents for 5367/500









































































































































































Search results

Summary of Contents for 5367/500

Reviews:

Related manuals for 5367/500

Brands by name

Popular brands

AGFA 5367/500, User Manual

Search results

Summary of Contents for 5367/500

Reviews:

Related manuals for 5367/500

Brands by name

Popular brands