Film loading procedure
1.
Open the empty input tray.
WARNING:
To avoid possible film jams, make sure to open input tray all
the way.
2.
The printer is ready to receive a new film when the following message
appears:
3.
Remove the white cover sheet.
4.
Take film pack, and open it.
Note
:
Verify that the film type on the film pack corresponds
with the sticker on the tray! If you do use an other film type,
you are advised to change the label on the tray.
86
| Crystal-M Imager | Basic Operation (operator mode)
3852B EN 20210601 1655
Summary of Contents for 5367/300
Page 1: ...Crystal M Imager 5367 300 User Manual 3852B EN 20210601 1655 ...
Page 12: ...12 Crystal M Imager Crystal M Imager 3852B EN 20210601 1655 ...
Page 57: ... The display Crystal M Imager Introduction 57 3852B EN 20210601 1655 ...
Page 161: ...Crystal M Imager Plug Play Installation Manual 161 3852B EN 20210601 1655 ...