AGFA 5367/300 User Manual Download Page 11

Page: 11 / 168

Film types

Film

type

Film base

Application

Film sizes

Average optical

density
(X-Rite 310 den-

sitometer)

CF-B

blue-trans-

parent

General Radi-

ography

8x10”, 10x12”,

11x14”, 14x14”,

and 14x17”

3.2

CF-M

blue-trans-

parant

Mammogra-

phy

8x10”, 10x12”

and 11x14”

3.8

The printer has 2 input trays. Both trays can handle all listed film types and

formats.
When a new film pack is loaded, the Film Identification tag is read and the

printer settings are automatically adjusted.
The Key-operator can overrule the film settings for the input tray.

Labeling the input trays

Note

If you want to change the film format, the tray

configuration must be modified.

Appropriate labels have been applied on the input tray(s) by the service

personnel at installation of the printer, indicating the type of new film to be

loaded when the tray is empty.

Crystal-M Imager | Crystal-M Imager |

3852B EN 20210601 1655

Summary of Contents for 5367/300









































































































































































Search results

Summary of Contents for 5367/300

Reviews:

Related manuals for 5367/300

Brands by name

Popular brands

AGFA 5367/300, User Manual

Search results

Summary of Contents for 5367/300

Reviews:

Related manuals for 5367/300

Brands by name

Popular brands