AGCO 1- 11
MF 2600 H SERIES WORKSHOP SERVICE MANUAL
INTRODUCTION AND SAFETY
Always use the tools and gear that are right for
the job, especially when you are working with
heavy assemblies and parts. Make sure that
the hydraulic jack, the block and tackle, the
chain are in perfect condition, and strong
enough for the load.
Every time you use a power tool, check that it
is grounded and that there are no exposed
wires.
Always disconnect the negative cable from the
battery, so that no one can accidentally turn on
the starter motor.
fig.1
fig.2
fig.3
