AGCO Glencoe SS7400 Soil Saver, Assembly Instructions Manual

Page: 42 / 51

LIGHT CONNECTOR RECEPTACLE
Attach connector storage receptacle to tongue (Fig.
10). Use the pre-drilled holes and
1
4
″ self-tapping
screws.
WIRE HARNESS
Install wire harness as in layout. Position harness
over frame and connect lights. Beginning at the light
posts and working toward the tractor, use plastic ties
to securely fasten harness in place.
SMV SIGN
Install sign (Fig. 11) as shown on location pages.
1. Use
3
8
″ x 5
1
2
″ bolts, lock washers, nuts and
clamp plate to mount vertical bracket to frame.
2. Use
1
4
″ x
3
4
″ bolts, lock washers and nuts to
mount sign on bracket.
Disclaimer
The transport lighting and marking for this equipment has been
designed to conform to the applicable standards of the American
Society of Agricultural Engineers. However, conformance to the
standards requires mounting the components in accordance with
the assembly instructions contained in this publication. The
mountings and locations of the components have been designed
to avoid interference with approved attachments or accessories.
Check your local law enforcement agency(s) for local lighting and
marking requirements before transporting the equipment on public
roads.
TRANSPORT SAFETY CHAIN
Attach chain to side of hitch plate with
3
4
″ bolt, flat
washer and locknut furnished in bundle.
Note: If tractor is not equipped with chain clevis (Fig.
12), install clevis provided in bundle.
42
TRANSPORT LIGHTS AND REFLECTORS
Fig. 10 - Light Connector Storage
1. Socket
Fig. 11 - SMV Sign
1. Sign
SS7000-72A
SS7000-21B
1
1
Fig. 12 - Transport Safety Chain