AGCO Glencoe SS7400 Soil Saver, Assembly Instructions Manual

Page: 32 / 51

CARRIER and SHANKS
Note: Refer to appropriate ridge leveler location illustration on following pages.
1. Mount carrier arms to implement rear frame.
2. Attach shank support tube to carrier arm rear
plates.
Note: Attach at height for desired leveling effect.
Vertical adjustment range is 7 .″
IMPORTANT! 15-shank machines: To avoid
shank tube damage when folding wings, position
wing tubes 6 ² from center tube.
3. Install shank on support tube between bottom
clamp plate and tube. Space shanks between
main frame shanks.
4. Attach ground tools to shanks using
3
8
″ x 1
5
8
″ Grade 5 plow bolts, flat washers, lock
washers and nuts.
32
RIDGE LEVELER