AGCO Glencoe SOIL FINISHER SF4600, Operator'S Manual

Page: 18 / 36

OPERATION
Spring Cushioned Disc Gangs
The disc gangs should not operate deeper than 3" to
4" and no deeper than necessary for desired residue
cutting. In high residue conditions the discs should
only cut the residue.
In coulter chiseled ground the discs should be
adjusted to run just above the bottom of the furrows
between the ridges.
Cutting depth is adjusted hydraulically. Excessive
disc gang down pressure could affect frame level
and adversely affect machine performance.
If the disc gangs are not required for a tillage
operation, they may be raised out of the working
position.
The blades are spaced at 10" with an 8 cutting
angle. Feathering blades are mounted at the end of
each gang.
14
GNC0015
GNC0004