AGCO Glencoe DR8700, Operator'S Manual

Page: 6 / 46

1 INTRODUCTION
The DR8700 Series Disc Ripper is a quality product designed to give years of trouble free performance.
By following each section of this manual, your system will perform as designed for you and your operation.
SECTION 1
gives basic instructions on the use of this manual.
SECTION 2
gives product specifications. These specifications supply lengths and measures for your
equipment. A Standard Bolt Torque Table is provided to give guidelines for bolt torques
to be used when servicing this product.
SECTION 3
contains assembly instructions for your DR8700 Series Disc Ripper. When these proce-
dures are correctly followed, your equipment should provide you years of trouble-free
operation and service.
SECTION 4
instructs how to operate your equipment before using it, and describes adjustments
needed. It also gives practical advice for the care and maintenance of your equipment.
Drawings in this section locate adjustment points on the equipment.
SECTION 5
is a troubleshooting guide to aid in diagnosing and solving problems with the equip-
ment.
PARTS LIST
is a separate manual showing the various assemblies, subassemblies, and systems.
Refer to that manual when ordering replacement parts. Order parts from your dealer.
WARRANTY
The Warranty Registration form must be completed by the dealer and signed by both
the dealer and the customer prior to delivery.
NOTE: IMPROPER ASSEMBLY, MODIFICATION, OR MAINTENANCE OF YOUR
MACHINE CAN VOID YOUR WARRANTY.
1-1