AGCO Glencoe CC4450, Operator'S Manual

Page: 26 / 37

SERVICE
TROUBLESHOOTING
Problem Probable Cause Probable Correction
Poor penetration Main frame not level Level frame
Ground too hard Make multiple passes through field
Wrong chisel tool point Select correct point
Tires inflated unequally Inflate to correct pressure
Malfunctioning depth control
cylinder
Repail cylinder or hydraulic system
Worn points Replace points as necessary
Tractor wheels slipping Insufficient rear wheel Add weight as required
Field too wet Wait until field is dry
Tractor front end unstable Add front end weights as required
Chisel plow running crooked Plow not level side-to-side Inflate tires to equal and correct pressure
Unbalanced twisted shovel
arrangement
Install number of RH and LH twisted
shovels
Points incorrectly spaced Space points evenly
Trash plugging Incorrect point spacing Space points evenly
Points plug at wheels Move stub extensions and points away
from wheels
22