AGCO Challenger RoGator 635, Service Manual

Page: 37 / 41

632154-1 1-29
General
GENERAL
SERVICE MANUAL
This service manual has been prepared with the latest
service information available at publication time. Read
service manual carefully before performing any service
on machine.
Right-hand and left-hand, as used in manual, are
determined by facing the direction machine travels
when in use.
Photos, illustrations and data used in manual were
current at time of printing, but due to possible
engineering and/or production changes, each machine
can vary. Manufacturer reserves the right to redesign
and change machine as necessary without notification.
m
WARNING: Some photographs in manual
show machine with shields removed for a
better view of subject matter. Never
operate machine with any shields
removed.
Divisions and Page Numbers
Service manual is separated into divisions. Refer to
Master Table of Contents.
Each division has an identifying part number with an
alpha revision level indicator. Each division has a Table
of Contents and an Index.
Each page is identified with division part number and
revision level. Pages are in simple numeric order within
each division.
Unit of Measurement
Measurements are given in metric units followed by
U.S. equivalent. Hardware sizes are given in
millimetres for metric and inches for U.S. hardware.
REPLACEMENT PARTS
To receive prompt efficient service, always remember
to have:
• Correct part description and part number
• Model and serial number of machine