AGCO Challenger MT845E Workshop Service Manual Download

Page: 47 / 61

2.5.6 Install the secondary fuel filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-187

2.5.7 Remove the fuel filter water separator on machines not equipped with DEF . . . . . . . 2-188

2.5.8 Install the fuel filter water separator on machines not equipped with DEF . . . . . . . . 2-190

2.5.9 Remove the right fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-193

2.5.10 Install the right fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-200

2.5.11 Remove the left fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-206

2.5.12 Install the left fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-210

2.5.13 Remove the third fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-214

2.5.14 Install the third fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-217

2.5.15 Prime the fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-218

2.6 Exhaust system components

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-220

2.6.1 Remove the diesel exhaust fluid system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-220

2.6.2 Install the diesel exhaust fluid system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-228

2.6.3 Remove the exhaust system on machines with DEF . . . . . . . . . . . . . . . . . . . . . . . . 2-235

2.6.4 Install the exhaust system on machines with DEF . . . . . . . . . . . . . . . . . . . . . . . . . . 2-244

2.6.5 Remove the exhaust system on machines not equipped with DEF . . . . . . . . . . . . . . 2-252

2.6.6 Install the exhaust system on machines not equipped with DEF . . . . . . . . . . . . . . . 2-256

2.7 SCR system

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-260

2.7.1 Selective catalytic reduction (SCR) System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-260

2.7.2 Supply module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-260

2.7.3 Fill the diesel exhaust fluid tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-261

2.7.4 DEF heater circuit fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-261

2.7.5 DEF storage and shelf life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-261

2.7.6 Low diesel exhaust fluid (DEF) level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-262

2.8 Fluid specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-264

2.8.1 Oil specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-264

2.8.2 Fuel specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-264

2.8.3 Coolant specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-264

2.9 Safety instructions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-265

2.10 To the user

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-267

2.10.1 Engine type designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-267

2.10.2 Location of the engine serial number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-268

2.10.3 Marking of the electronic control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-269

2.10.4 Lifting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-270

2.11 Engine construction

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-272

2.11.1 Engine overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-272

2.11.2 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-274

2.11.2.1 Principal dimensions and data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-274

2.11.2.2 Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-274

2.11.2.3 Lubrication system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-274

2.11.2.4 Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-275

2.11.2.5 Electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-275

2.11.2.6 SCR system technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-275

2.11.3 Cylinder block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-276

2.11.4 Flywheel housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-276

2.11.5 Valve mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-276

2.11.6 Cylinder head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-276

2.11.7 Crank mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-277

2.11.8 Timing gears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-278

2.11.9 Lubrication system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-278

2.11.9.1 Oil pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-279

2.11.9.2 Oil filter and oil cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-280

2.11.10 Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-280

2.11.10.1 Coolant pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-282

2.11.10.2 Thermostats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-282

2.11.11 Air control system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-284

2.11.11.1 2 stage turbocharging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-285

Table of contents

2-2

Rubber Track Tractor

79036240F

Summary of Contents for Challenger MT845E






























































Search results

Summary of Contents for Challenger MT845E

Reviews:

Related manuals for Challenger MT845E

Brands by name

Popular brands

AGCO Challenger MT845E, Workshop Service Manual

Search results

Summary of Contents for Challenger MT845E

Reviews:

Related manuals for Challenger MT845E

Brands by name

Popular brands