1.6 Service intervals
IMPORTANT:
Always stop the engine before starting service work
When required:
• Cab recirculation filter - clean/inspect/replace
• Cab air filter - clean/replace
• Check the HVAC drain lines and clean as needed
• Batteries - replace
• Alternator belt - replace
• Fan and air conditioner belt - replace
• Fan drive - clean
• Cooling cores - clean
• Drawbar wearplates and swing stops - replace
• Drive wheel hub oil level - check
• Primary engine air cleaner filter - inspect/replace
• Fuel tank water and sediment - drain
• Fuses, circuit breakers, and relays - replace/reset
• Idler hubs oil level - check
• Midwheel hub oil level - check
• Undercarriage belt - remove/replace
• Undercarriage belt alignment - check/adjust
• Fuel system water separator - drain
• Window washer reservoir - fill
• Window wipers - inspect/replace
• Windows - clean
1.6.1 Maintenance schedule
Initial checks: Make sure that all hose clamps on the engine are tight at 10 hours and again at 50 hours.
Tighten and torque the hose clamps if necessary. Repeat the checks when a hose is replaced.
Every 10
hour or
daily
Every 50
hour
Every 250
hour
Every 400
hour
Every
1000 hour
Other
Service Item
x
Fill the fuel system
x
Check the power train oil level
x
Check the hydraulic system oil
level
x
Check / drain the fuel water
separator
x
Check the undercarriage system
x
Examine the engine air filter
restriction indicator
x
Drain the air tank
x
Lubricate the 3-point linkage
x
Examine the batteries
x
Obtain a sample of the hydraulic
system oil for analysis
4
GUID-EA0FBA0F-7172-4901-9612-36F8DE6176FA [V4]
GUID-68ED0C15-AB4F-4721-A997-12C9B6C2E6D9 [V6]
1. General
1-22
Rubber Track Tractor
79036240F
