SECTION 00 -- GENERAL INFORMATION
2
327 201 010
-- 11 -- 2004
REMARKS ABOUT SPARE PARTS
Use only
genuine parts
.
Only genuine parts guarantee the same quality, life, safety as original parts, as they are the same as those fitted
during standard production.
Only
genuine spare parts
can offer this guarantee.
All spare parts orders must be accompanied by the following data:
-- machine model (commercial name) and frame number;
-- combine type and number;
-- part number of the ordered part, which can be found in the ”Spare Part Catalogue”, used for order processing.
REMARKS ABOUT TOOLS
The tools that AGCO suggests and describes in this manual have been:
-- expressly studied and designed to operate on AGCO range combines;
-- required to get a reliable repair;
-- suitably manufactured and strictly tested to offer efficient and long--lasting working means.
By using these tools, Repair Personnel will benefit from:
-- working in the best technical conditions;
-- getting the best results;
-- saving time and effort;
-- working more safely.
CAUTION
Wear limit values indicated for certain parts should be considered to be recommended, but not binding. The words
”front”, ”rear”, ”right” and ”left” referred to different parts are meant with the operator sitting on the driver’s seat and
directed towards the combine standard running direction.
HOW TO MOVE THE COMBINE WITHOUT BATTERY
The cables of the outer power supply unit must be connected only to the relevant terminals of the negative and posi-
tive cables of the combine using efficient pliers to get a suitable and stable contact.
Disconnect all services (lights, windscreen wipers, etc...) before starting the combine.
If the operating efficiency of the combine electrical system must be checked, proceed only after connecting the
power supply unit. At the end of the check, disconnect all the services and switch the power supply off before discon-
necting its cables.
