54
CAUTION: When the battery symbol appears, you should
replace the batteries immediately. Only use CR2032
batteries.
Your meter comes with two pre-installed, CR2032, 3 volt,
lithium batteries. If your batteries run low, the battery symbol
flashes until you change the batteries. The backlight is
disabled in all modes when the battery symbol is on. When
changing batteries the current time and date settings will
be reset. The time and date will automatically be set to 01-01
12:00. Correct time and date settings are needed to get
correct averages. Removing the batteries does not affect the
meter’s memory or previously stored user settings, such as
those set in SET Options (e.g. alarms). If a battery is installed
incorrectly it will damage the other battery in the meter. If this
happens discard both batteries.
Note: Dispose of used batteries according to your local environ-
mental regulations. Your meter is an electronic device. When dis-
posing of your meter follow all local environmental regulations.
Replacing the Batteries
[1] Open Battery Door:
Make
sure the meter is deactivated. Turn
the meter so you are looking at
the battery door. Press the battery
door clip to open. Remove the
18
CHAP
TE
R
Batteries
