E. TO REMOVE ENERGY REGULATOR
1. Isolate from electric supply.
2. Proceed as ‘CERAMIC HOB AND FRAME’.
3. Remove (2) screws securing control to control mounting panel.
4. Withdraw control and cables taking care not to strain the cables.
5. Disconnect cables from the control.
NOTE:
Take care to identify terminations.
6. Re-assemble in reverse order.
F. TO REMOVE OVEN THERMOSTATS
1. Isolate from electric supply.
2. Proceed as ‘TO REMOVE ENERGY REGULATOR’.
3. Remove (7) back panel screws.
4. Remove thermostat phial and capillary through back of the cooker, note correct capillary route.
5. Re-assemble in reverse order.
G. TO REMOVE GRILL LINERS - SEE FIG. 24
1. Remove LH and RH runners (4 screws per runner).
2. Remove runners and liners.
31
Fig. 23A
DESN 513198
Summary of Contents for Six Four Series
Page 12: ...Users Guide 12 ...
Page 33: ...33 SCHEMATIC WIRING DIAGRAM ...
Page 34: ...34 ...
Page 35: ...35 ...
