l
In the event of your appliance requiring maintenance, please call AGA Service or contact your authorised
distributor/stockist.
l
Your cooker must only be serviced by a qualified engineer from an authorised distributor.
l
Do not alter or modify the cooker.
l
Only the spares specified by the manufacturer are to be fitted.
WARNING: WHEN SERVICING OR REPLACING COMPONENTS ISOLATE THE APPLIANCE FROM THE ELECTRICAL
SUPPLY.
A. TO REMOVE SIDE PANELS
1. Isolate from electric supply.
2. Remove ceramic hob and frame assembly. (See section B).
3. Lower the cooker onto the rollers by turning the adjusting feet fully anti-clockwise.
4. Roll the cooker slightly forward.
5. Remove rear fixing screws (3) and slide panel back and out.
6. Re-assemble in reverse order.
B. TO REMOVE CERAMIC HOB AND FRAME
1. Isolate from electric supply.
2. Pull off the control knobs. (See Fig. 21).
3. Remove corner stay button.
4. Remove corner stay nut.
5. Remove timer assembly. (See section D).
6. Lift off the assembly.
7. Disconnect oven neons.
8. Disconnect two connector plugs.
9. Re-assemble in reverse order, fitting the timer assembly last. (See section D).
29
SERVICING
Fig. 21
DESN 513140 A
Summary of Contents for Six Four Series
Page 12: ...Users Guide 12 ...
Page 33: ...33 SCHEMATIC WIRING DIAGRAM ...
Page 34: ...34 ...
Page 35: ...35 ...
