Page 14 of 42
AGA Ellesmere & Ludlow Electric
– All Wi-Fi Enabled Models - 2022 Version
Installation & User Manual
Congratulations the rear fixing bracket is now complete and the stove is securely fixed to the rear
wall. Now you can open the door without the possibility of the stove tipping forward and lay your log
arrangement:
Please note the arrows on the drawing so COOL air enters at the rear of the stove then HOT
air comes out from the front of the stove below the door
Please ensure the stove is fitted onto a non-combustible hearth as described earlier in this
manual
Please ensure there is 100 mill gap at the rear so COOL air from the room can enter into the
rear of the stove without any restriction
IMPORTANT -
Please make sure the front Hot Air outlet and the rear Cool Air inlet are regularly
cleaned so no foreign matters such as pet hairs and carpet fluff can block these 2 vents
NEVER COVER THIS STOVE
– THIS COULD CAUSE A FIRE
Now just plug in your stove using the 3 pin plug lead provided into the female plug socket at the
rear of the stove. Please note the 3 pin Plug must be plugged into a wall mounted three pin
socket (which is part of your 13 amp ring main) not an extension lead or a multi plug in the wall
socket.
Please Note - A 10 Amp fuse is fitted into the 3 pin plug on the lead provided
HOT AIR OUT
COOL AIR IN
