AGA APRO48AGSS, User Manual

Page: 27 / 32

CONVERSION
Check the appliance is electrically safe and gas sound when you have finished.
23
x 4 screws
Light Convection
Fan
Oven
Light
Oven Griddle
Fig. 8.3
Fig. 8.4
Fig. 8.5
Fig. 8.6
Fig. 8.7
Valve Adjustment
Disconnect from the electricity supply.
Pull off all the control knobs. And remove the bezels.
Open the oven doors and remove the 4 fixing screws
underneath the control panel (Fig. 8.3) . Remove the control
panel, taking care not to damage it.
Using a flat headed screwdriver replace the bypass screws
with the screws from the LPG conversion kit. Be sure to save
the screws removed from the appliance for possible future
use.
Refit the control panel, bezels and control knobs.
Griddle
Remove the flue grille and back panel. Remove the burner
venturi cover for easier access.
Using a wrench hold the orifice housing whilst removing the
nut. Remove the orifice from its holder and replace with the
griddle orifice for LPG (122).
Ovens
Remove the 4 fixing screws on the toe kick panel. Hold the
bottom edge, lift up slightly and gently pull towards you.
Remove the 2 screws holding the orifice bracket
(Fig. 8.4) .
Locate the orifice and remove using an adjustable wrench.
Replace with oven burner orifice 132 for the main oven and
orifice 110 for the small oven.
Reassemble in the reverse order.
Broiler
Remove the rear guard and cover.
Using a wrench hold the orifice housing whilst removing the
nut. Remove the orifice from its holder and replace with the
broiler orifice for LPG (118).
Gas Regulator
To access the gas regulator remove the main 30” oven door.
See “Removing the Oven Doors” on page 13. Then remove
the oven racks and the burner cover.
Remove the right hand baffle
(Fig. 8.5)
. Unscrew the cap
from the front of the regulator housing
(Fig. 8.6)
. Unscrew
the plastic insert from the cap, turn it round and screw back
into the cap (Fig. 8.7) .
Reassemble in the reverse order.
Natural Gas LPG