8
9
Performing Factory Reset
If the headphone is having difficulty pairing to a device, please follow the simple steps below to
perform a factory reset.
1. While the headphone power is ON, press and hold the Button and the Volume -
Button simultenously for 2 seconds and the Bluetooth/ANC Status Indicator will flash twice in
purple together with 2 beeps.
2. The factory reset is completed. The headphones will start device pairing mode automatically
with the Bluetooth/ANC Status Indicator flashes alternately in red and blue.
Connecting the Headphones to a Device Using the Analog Audio Cable
The headphones can be used with any device through physical wired connection by connecting
the headphones' 3.5mm Audio Jack to the device with the supplied analog audio cable. Once the
3.5mm Audio Jack is plugged in, the headphones will turn OFF immediately with all media controls
being disabled. Please perform media controls via the connected device instead.
* It is possible to activate the ANC fuction when the headphone is used with physical wired
connection.
* As the headphone power is OFF, no announcement of "Noise Cancelling" or "OFF" will be made
when the ANC function is activated or deactivated. Please refer to the Bluetooth/ANC Status
Indicator for the status of ANC function.
Music Playback
Phone Call
Music Playback /
Phone Call
Siri/
Google Assistant
Press the Power Button once
Press the Power Button once
Press and hold the Button for 2 seconds
Press and hold the Volume - Button for 2 seconds
Press the Power Button once
Press the Power Button once
Press and hold the Power Button for 1second
Press the Button
Press the Volume - Button
Press the Power Button twice *1
Media Control
Play
Pause
Next
Previous
Receiving Call
End Call
Declining Call
Increasing Volume
Decreasing Volume
Activating
* 1: There is a possibility that this does not work for certain devices.
* Media controls on the headphones are disabled when the headphone is used with physical
wired connection.