6
7
WHP01K
To perform initial device pairing:
1. Press and hold the Power Button for 3 seconds and the headphones will turn ON with a "Power
ON" announcement. The headphones start device pairing mode automatically with the
Bluetooth/ ANC Status Indicator flashing alternately in red and blue.
2. With the Bluetooth function of the device being ON, choose "WHP01K" under the device list.
The device pairing is successful if "WHP01K Connected" is shown.
To reinitiate device pairing with another device:
1. While the headphone power is OFF, press and hold the Power Button for 5s and the
headphones will turn ON and start device pairing mode with "Power ON" & "Pairing"
announcements and the Bluetooth/ANC Status Indicator flashes alternately in red and blue.
2. With the Bluetooth function of the device is ON, choose "WHP01K" under the device list. The
device pairing is successful if "WHP01K Connected" is shown.
* It is necessary to unpair the current device pairing before reinitiating a new device pairing. This
can be done by removing the current connection or turning off the Bluetooth function of the
current paired device.
Performing Device Pairing
In order to use the WHP01K with your device, initial device pairing is necessary. Once the
headphone is paired to a device, it will connect to the device automatically next time the
power is turned ON.
Activating ANC (Active Noise Cancelling) Function
Press and hold the ANC Button for 2 seconds and the ANC function will be activated in 2 different
ways depending on the status of the headphone.
If headphone power is ON: Announcement "Noise Cancelling" will be emitted and the
Bluetooth/ANC Status Indicator flashes alternately in blue and green at a regular interval.
If the headphone power is OFF: The Bluetooth/ANC Status Indicator will light up green.
* The ANC function can be activated even when the power is OFF. As ANC function consumes
battery power, when the headphones are not in use, please make sure that the ANC function is
properly turned OFF.
Deactivating ANC (Active Noise Cancelling) Function
Press and hold the ANC Button for 2 seconds and the ANC function will be deactivated in 2
different ways depending on the status of the headphone.
If the headphone power is ON: Announcement "OFF" will be emitted and the alternately flashing
blue and green light of the Bluetooth/ANC Status Indicator fades off.
If the headphone power is OFF: The green light of the Bluetooth/ANC Status Indicator fades off.
* The status of the ANC function when the headphone power is OFF can be easily recognizable by
refering to the Bluetooth/ANC Status Indicator.
Green light: ANC function ON
No light: ANC function OFF
Setting
Device