AG SPRAY LA5000 Operation & Maintenance Manual Download Page 5

S H O P   O N L I N E   @   W W W . A G S P R A Y . C O M

5

Ag Spray Equipment warrants to the buyer that the new 

machinery is free from defects in material and workmanship.

This warranty is only effective as to any new machinery which 

has not been altered, changed, repaired or treated since its 

delivery to the buyer, other than by Ag Spray Equipment or 

its authorize dealers or employees, and does not apply to 

accessories, attachments, tools or parts, sold or operated with 

the new machinery, if they have not been manufactured by Ag 

Spray Equipment.

Ag Spray Equipment shall only be liable for defects in the 

materials or workmanship attributable to faulty material or bad 

workmanship that can be proved by the buyer, and specifically 

excludes liability for repairs arising as a result of normal wear and 

tear of the new machinery or in any other manner whatsoever, 

and without limiting the generality of the foregoing, excludes 

application or installation of parts not completed in accordance 

with Ag Spray Equipment operator’s manual, specifications or 

printed instructions.

Written notice shall be given by registered mail, to Ag Spray 

Equipment within seven (7) days after the defect shall have 

become apparent or the repairs shall have become necessary, 

addressed as follows:  Ag Spray Equipment, 5834 East 23rd 

Street, Columbus, NE  68601.

This warranty shall expire 2 years after the date of delivery of 

the new machinery.

If these conditions are fulfilled, Ag Spray Equipment shall at 

its own cost and at its own option either repair or replace any 

defective parts provided that the buyer shall be responsible 

for all expenses incurred as a result of repairs, labor, parts, 

transportation or any other work, unless Ag Spray Equipment 

has authorized such expenses in advance.

The warranty shall not extend to any repairs, changes, alterations, 

or replacements made to the new equipment other than by Ag 

Spray Equipment or its authorized dealers or employees.

This warranty extends only to the original owner of the new 

equipment.

Rubber parts are not warranted.  (including tires, hoses, 

grommets)

This warranty is limited to the terms stated herein and is in lieu 

of any other warranties whether express or implied, and without 

limiting the generality of the foregoing, excluded all warranties, 

express or implied or conditions whether statutory or otherwise 

as to quality and fitness for any purpose of the new equipment.  

Ag Spray Equipment disclaims all liability for incidental or 

consequential damages.

This sprayer is subject to design changes and Ag Spray Equipment 

shall not not be required to retro-fit or exchange items on 

previously sold units except at its own option.

LIMITED WARRANTY

MANUFACTURING

QUALITY PRODUCTS

FOR 30 YEARS

Summary of Contents for LA5000

































Reviews: